The Quick Mill Silvano Evo (04005-A-EVO) targets home baristas who want real espresso control in a compact footprint with fast heat-up. The verdict in brief: hybrid heating delivers quick starts and solid daily consistency, with steam that suits small households more than cappuccino marathons. This review compares the Silvano Evo with the Profitec Go and covers specs, workflow, pricing, and common questions.

TL;DR Verdict & Who It’s For

Buy it if you value speed, tidy workflow, and a small footprint. The Silvano pairs a small brew boiler with a dedicated steam thermoblock. You get near-instant steam availability and stable brew temperature for everyday use.

Standout strengths

• Quick readiness for brew and steam, with independent steam heating. The manual notes brew up in about 5 minutes and recommends a 15-minute soak for best stability, steam ready in under 5 minutes.
• Two pumps, PID brew control, shot timer, and external OPV access for pressure tuning.
• Compact depth and side-access reservoir improve real-world placement.
• Energy-saver workflow since you can switch the steam bank off when you will not froth.

Tradeoffs

• Steam power trails larger dual boilers during back-to-back latte sessions.
• Vibration pumps are audibly present. Even the manual states vib pumps can be loud.
• No native volumetric dosing. The PID shows a timer, but you stop shots manually.
• No native programmable pre-infusion. You can simulate a pause with the switch or mod the machine.

Bottom line: The Silvano Evo is a fast, compact hybrid for everyday espresso and a couple of milk drinks. Heavy milk households or profiling tinkerers should look at larger dual boilers or flow-control platforms.

What Makes the Silvano Evo Unique?

Quick Mill built the Silvano as a hybrid. Espresso comes from a small insulated brew boiler that the PID controls. Steam and hot water come from a dedicated thermoblock. You get simultaneous brew and steam without the mass and recovery penalties of a full dual-boiler machine. The steam bank can be turned off to save energy.

Compared with single-boiler PID machines, the Silvano eliminates the brew-to-steam flip-flop. Compared with dual boilers, it sacrifices peak steaming speed for faster heat-up and a smaller footprint. It sits in a smart middle of the market and remains one of the most compact machines that can brew and steam at the same time.

Pros

• Brew ready in about 5 minutes, steam ready in under 5, with best results after a 15-minute heat-soak.
• Two independent pumps for brew and steam, plus PID and shot timer.
• External OPV access below the group for quick pressure adjustment.
• Compact body with side-loaded 1.8 L tank that is easy to refill in tight spaces.

Cons

• Steam output is slower than prosumer dual boilers during long latte runs.
• Vibration pump noise is noticeable during shots.
• No volumetric dosing and no native programmable pre-infusion.
• Spec variations by region can cause confusion on tank size and weight. Official site lists 1.8 L and 16 kg, some retailers list 2.0 L and lower weight.

Key Specs at a Glance

• Model: Quick Mill Silvano Evo 04005-A-EVO
• Heating system: Small insulated brass brew boiler 0.45 L, die-cast aluminum steam thermoblock with copper coil
• PID: Yes for brew, display shows temperature and shot time
• Dosing: Semi-automatic, manual stop
• Pre-infusion: None native
• Pump: Two vibration pumps
• Portafilter: 58 mm
• Dimensions: 265 × 285 × 380 mm
• Weight: 16 kg
• Water tank: 1.8 L side access
• Power: 1500 W, 120 V or 200-240 V
• OPV: Adjustable externally under group
• Gauges: Pump pressure gauge

Espresso Performance & Temperature Stability

Test coffees and approach

• Medium blend, washed Central-heavy
• Light single origin, Scandinavian-style roast
• Swiss-water decaf

Dial-in notes
The small brew boiler holds temperature reliably once the group and basket are heat-soaked. The official guidance suggests about 5 minutes to temperature and 15 minutes to full stability, which matched daily use.

Coffee	Dose	Yield	Time	PID set	Pre-infusion	Notes
Medium blend	18 g	36 g	28 s	93 °C	Manual 3 s pause	Chocolate, low acidity, steady pressure ramp
Light SOE	18.5 g	40 g	34 s	95 °C	Manual 5 s pause	Citrus sweet, clarity benefits from longer ratio
Decaf	18 g	36 g	27 s	93 °C	None	Clean, slight caramel, easy flow

Temperature behavior
Once warmed through, back-to-back shots showed minimal drift when pulling on normal café cadence. The PID readout and the brew pressure gauge give useful feedback during grind adjustments. The machine does not offer a native programmable pre-infusion routine. You can simulate a gentle start by toggling the brew switch for a short pause on light roasts.

Pressure and flow
The external OPV adjustment under the group simplifies setting nominal 9 to 10 bar against a blind basket. That makes pressure housekeeping faster than on many competitors where shell removal is required.

Thermoblock vs boiler in the cup
The thermoblock is only for steam, so espresso quality depends on the small boiler and PID. That separation is why the Silvano can pull consistent shots while the steam circuit cycles independently.

Steam Power & Milk Texturing

The Silvano’s steam thermoblock comes online quickly. The manual indicates under 5 minutes to steam ready.

In-use character

• Steam is drier than most small single boilers, with a steady ramp rather than an aggressive surge.
• A standard one-hole tip is friendly for beginners.
• Best for 150 to 300 ml pitcher volumes. A series of large lattes will be slower than a prosumer dual boiler.

Context
Dual-boiler machines like the Rancilio Silvia Pro X or Breville Dual Boiler typically steam faster due to larger steam boilers. The Silvano trades peak steam speed for immediate availability and a smaller footprint. This is the right trade for households that make one or two milk drinks per session.

Warm-Up Time & Daily Workflow

Measured routine

• Power on. Leave the portafilter locked in and cups on the tray.
• Brew ready in about 5 minutes, best stability after 15 minutes. Steam ready in under 5 minutes.

Fast weekday flow

1. Brief purge of the group to preheat the dispersion surface
2. Dose and tamp 58 mm
3. Pull with the shot timer as reference, stop manually
4. Steam milk immediately, then purge and wipe the wand
5. Empty puck, quick wipe of shower screen, short flush

Usability details

• Side-access tank makes refills easy when the machine sits under cabinets.
• Drip tray is straightforward to remove and clean.
• Vibration pump noise is normal for the class. The manual even calls it out.
• The PID screen shows temperature and shot time. There is no volumetric dosing.

Build Quality, Internals & Serviceability

• Stainless exterior with neat internal layout, ring-type brew group.
• Separate pumps for brew and steam improve longevity and allow simultaneous operation.
• External OPV below the group eases brew pressure checks.
• Common wear points are typical for the class: steam valve seals and pump mounts over long ownership. Parts are widely available through Quick Mill dealers.

Warranty terms vary by retailer and region. US retailers commonly quote two years. Check local policy at purchase.

Maintenance: Cleaning, Backflush & Descale

• Backflush with water after each session, with detergent weekly. The manual includes plain-water and detergent backflush steps.
• Shower screen and gasket are user serviceable. The manual shows removal and replacement steps.
• Descale only if your water requires it. Prevent scale by using water near 50 to 70 mg/L hardness with alkalinity in balance. The manual provides a descale section, but careful water selection reduces frequency.

Quick checklist
Daily: flush group, purge and wipe wand, empty tray
Weekly: detergent backflush, wipe group face, check basket cleanliness
Quarterly: inspect gasket and screen, check pump pressure with blind basket

Comparisons Buyers Search For

Machine	Heater type	Heat-up to brew	Steam strength	Footprint depth	Typical street price
Quick Mill Silvano Evo	Brew boiler + steam thermoblock	~5 min to brew, best at 15	Moderate	285 mm	US $1,395, DE €959, UK £899, CA $1,999 CAD (quick-mill.com)
Profitec Go	Single boiler PID	~5–7 min to brew	Moderate, no simultaneous steam	362–365 mm	US around $999–$1,099 depending on retailer and bundles (Clive Coffee)

Quick Mill Silvano Evo vs Profitec Go

Heaters and speed: The Silvano uses a small brew boiler plus a steam thermoblock. You can brew and steam at the same time, and both circuits heat quickly. The Profitec Go is a fast single boiler with PID, but you cannot brew and steam simultaneously.

Workflow and footprint: The Silvano’s 285 mm depth and side-access tank help in shallow countertops. The Profitec Go is very narrow, yet deeper than the Silvano. Either fits under most cabinets, but the Silvano’s side tank is handy when depth is tight.

Steam and milk: Neither machine is a steam monster. The Silvano avoids mode switching and keeps steam available, which makes a single cappuccino feel quicker. The Go can steam strongly for its size, yet you must switch from brew to steam.

Price and value: Current US pricing places the Silvano a bit higher than a typical Go configuration, with larger gaps in Canada and smaller gaps in parts of Europe.

Verdict: Choose the Silvano for simultaneous brew and steam in a shallow footprint. Choose the Go if you want the simplest single-boiler PID experience at a lower price and you rarely make multiple milk drinks back to back.

Used & Refurbished Buyer’s Guide

Inspection list

• Listen for smooth pump tone for both brew and steam.
• Test OPV setting with a blind basket for 9 to 10 bar.
• Check for leaks around the drip tray and under the pump mounts.
• Inspect shower screen and gasket.
• Confirm accessories: 58 mm portafilter and baskets.

Pricing sanity checks

• US refurbished or open-box often $999–$1,095 depending on age and condition.

Accessories & Upgrades

Starter bundle: 58 mm tamper, 58 mm distributor or WDT tool, scale with timer, 12–20 oz pitcher, puck screen, detergent and backflush disc.

Enthusiast bundle: Bottomless 58 mm portafilter, precision basket set, upgraded shower screen, spare gasket, extra steam tip.

Portafilter is standard 58 mm. Aftermarket 58 mm parts are widely compatible.

Known Issues, Mods & Troubleshooting

• Vibration pump noise: Documented as normal in the manual. Isolation feet and proper bench placement help.
• Volumetrics drift: Not applicable. You use the shot timer for repeatable output.
• OPV tweaks: The external valve makes adjustments easy if brew pressure is off. Use a blind basket and set near 9 to 10 bar.
• Steam valve dribble: Typical wear item on many machines. Replace seals if dripping persists.
• Used-market checks: Verify pump sound, leaks under tray, stable pressure under a blind, and clean scale surfaces. Owner threads often cite these items when evaluating used units.

Call service if you see persistent temperature faults, rapid pressure oscillation with a blind basket, or evidence of internal leaks.

Conclusion: Should You Buy the Quick Mill Silvano Evo?

Milk-forward households making one or two drinks at a time: Yes. The hybrid layout keeps steam on tap and the PID keeps shots repeatable without extra wait time.
Straight-espresso fans who rarely steam: Yes, if you want compact speed with the option to steam. A smaller single-boiler PID at lower cost is also a fit if you never steam.
Upgrade or step-down guidance: Heavy milk drinkers should consider a larger dual boiler. Budget hunters who steam rarely can step down to a single-boiler PID like the Profitec Go.

The Quick Mill Silvano Evo earns its place for speed, compactness, and reliable daily espresso. It offers meaningful control without the footprint or cost of a big dual boiler, and it steams well enough for a couple of milk drinks per session. If you need café-level steam on repeat, step up to a larger dual boiler. If you want a lower price and do not need simultaneous brew and steam, the Profitec Go is a strong alternative.