Takeaway

The Vetrano 2B Evo is Quick Mill’s grown-up platform for people who want a classic E61 feel with modern power and a long ownership story. You get stainless dual boilers under PID, a real rotary pump, direct plumb and drain support, and a PID that pulls double duty as a shot timer. The reservoir is big, the steel chassis is service friendly, and the steam capacity is real for home latte rounds. It is not chasing gimmicks. It is the calm, repeatable machine you keep for a decade because it just works and it is easy to maintain.

At a glance

  • Format: Dual boiler E61 with lever actuation. Rotary pump. Tank or direct plumb and drain. PID temperature control with integrated shot timer on the Evo.
  • Boilers and power: Insulated stainless steel 0.75 L brew and 1.4 L steam, typical elements 800 W brew and 1400 W steam.
  • Water: 3 L reservoir with low-water protection, or direct line using the included kit. Drain-ready drip tray.
  • Controls: Front PID with timer, dual manometer, independent boiler switches, optional joystick steam valves, eco logic that can shut both boilers down after idle.
  • Dimensions and mass: Roughly 16 in H x 12 in W x 18 in D, about 70 lb. Plan depth with a portafilter locked in.
  • Electrical: 110 V in the US. Switchable 15 A or 20 A operation.
  • Typical pricing: United States commonly 2,895 to 2,995 USD. UK dealers often list around 2,149 GBP for current 0995 versions when in stock. EU shops around 2,045 to 2,475 EUR depending on VAT. Australia sits near 5,190 AUD. Promotions swing with retail calendars.

Build and design

Quick Mill builds the Vetrano 2B Evo like a tool. The casework is stainless and tight. The frame is steel. Inside you will find insulated stainless boilers sized for home use, 0.75 liter for brew and 1.4 liters for steam, each under its own PID loop. That pairing gives you stable shots and fast milk service without turning your kitchen into a sauna. The rotary pump sits vertically for access and longevity. The result is a quiet machine that still feels like a café box at the handle.

The group is a classic E61, which means the heavy, chrome-plated brass assembly that loves heat soak and rewards clean puck prep. The front panel is clean. Dual gauges track brew and steam pressure. The PID reads boiler temperatures and, on Evo units, becomes a shot timer the second you lift the lever. You can toggle each boiler on its own. You can also add joystick steam and water valves if you prefer that feel. The platform stays analog at the face and modern under the hood, which is the right split for this class.

Plumbing is honest. Run the 3 liter tank and refill from the top, or flip the source switches and connect to a line. The drip tray is drain-ready. Quick Mill and dealers ship the line fittings you need, which keeps the install simple for permanent bars.

Lighting is subtle but present. The Evo’s indicator LEDs flank the boiler switches, and some dealer bundles add accent lighting. None of that changes how the machine pulls shots. It simply makes status visible at a glance.

Workflow

Heat-up and heat soak

From cold, the machine reaches operational temperature quickly for a weekday espresso. For full thermal balance across the E61 group, baskets, and portafilter, give it a real soak before heavy sessions. The manufacturer manual lands on a practical guideline: around 15 minutes to see pressure and another stretch to hit perfect equilibrium for best taste. Set a wake schedule in your routine and the machine will greet you ready.

Controls that speed you up

The PID sets brew and steam temperatures by degree and shows shot time on Evo units. The dual manometer keeps brew and steam pressure honest. Independent boiler switches let you run brew-only when you want a quiet kitchen and lower case heat. Owners coming from heat exchangers notice the calm. You stop flushing, you start timing, and the machine gets out of your way.

Tank vs plumb

The reservoir is generous and protected by a low-water sensor. Plumb-in is clean. Switch the internal toggles to the line position, attach the braided hose, and route the tray drain if you want a zero-maintenance bar. Rotary pumps behave well under line pressure, and the acoustic footprint stays low. If you host often or you hate refilling, plumb-in is worth it. If you move apartments, switching back to tank takes minutes.

15 amp or 20 amp behavior

The Vetrano 2B Evo supports both. In 20 amp mode, the boilers can heat together, which shortens warm-up and keeps recovery snappy during back-to-back milk rounds. In 15 amp mode the controller alternates heat, but the PID handles the dance smoothly. Dealers configure the mode at bench test and include a converter cord for 15 amp setups, and you can change it later in the menu.

Ergonomics and counter fit

The footprint runs about 12 inches wide and 18 inches deep, around 16 inches tall. Weight is roughly 70 pounds. Plan true depth with a portafilter locked in and some slack for braided lines if you are plumbing. The lever clears most cabinets. The wand swings freely on both tips. If you prefer faster on-off action for steaming, order joystick valves. Knobs offer fine modulation and a familiar feel.

Espresso performance

Temperature stability and repeatability

Stainless boilers under PID plus the E61 thermal mass give you a predictable platform. Set brew temperature and build a routine around dose, distribution, and time. The Evo timer helps you stop guessing. You can move a degree or two when you change coffees and taste the change without juggling offsets or weird control logic. This is the strength of a straightforward dual boiler.

Preinfusion and profile feel

The E61 brings a gentle mechanical preinfusion. That softens the ramp into the puck and helps new users hit consistent 1:2 extractions in the high 20s seconds on medium roasts. If you like manual control over wetting and flow, the group accepts an E61 flow control kit with a needle valve and group gauge. Several reputable sellers offer Quick Mill branded or compatible kits. Add it after you have a baseline routine and the machine becomes a capable manual profiler for light roasts.

Puck discipline

The platform will not mask sloppy prep. You still need an even bed, a level tamp, and a grinder you can trust. The brew gauge and timer make diagnosis simple. If the needle surges early and the time runs short, you are channeling. Fix distribution, resist changing pump pressure, and tune grind. That habit gives you sweet shots day after day.

Recovery under real use

The small but insulated brew boiler and the larger 1.4 liter service boiler recover quickly. Pull a shot, steam a pitcher, wipe and purge, and you are back at setpoint. In 20 amp mode, recovery feels almost continuous for home pacing. In 15 amp mode, the PID balances the act well enough that most people will not notice unless they are entertaining.

Milk steaming

Steaming is confident. A 1.4 liter service boiler under PID gives you the pressure buffer you need for back-to-back lattes. Out of the box you will often find both a two-hole and a four-hole tip included. Run the two-hole while learning to texture, then switch to four-hole for 12 to 20 ounce pitchers when you want speed. The wand is anti-burn, so cleanup is quick, and the quarter-turn joystick option makes short aeration moves easy to hit.

Expect steady pressure through a pair of drinks without a mid-pour sag. If you are serving a table, bump the steam setpoint slightly, then bring it back down for daily use. These are simple changes that widen or narrow your texture window by intent rather than luck.

Maintenance and reliability

The Vetrano 2B Evo earns its place by being easy to service. Top access is straightforward. The base panels provide access points for drains and heaters. The rotary pump sits vertically with a tabbed access point on the right panel. The mushroom and gicleur are stainless. Those small touches show up when you are doing annual cleaning or when you need to clear a clog.

Daily care is classic prosumer E61. Backflush with water after heavy sessions. Detergent backflush weekly for daily users. Lubricate the lever cam on a calendar. Replace the group gasket before it hardens. The machine watches the water level so you do not run the pump dry. The eco behavior can shut both boilers down after idle which lowers case temperature and extends life for gaskets and nearby wiring. None of this is difficult. It is the ownership rhythm that keeps these machines running for a decade.

Water quality decides the long story. On tank, use softened or remineralized water and change cartridges on schedule. On line, install a regulator and proper filtration. Stainless boilers tolerate mistakes better than copper, but scale is indifferent to brand names. Protect the machine and you protect your shots.

Programming and control

You live on three knobs in the menu: brew temperature, steam temperature, and 15 A or 20 A selection. The PID behaves predictably. The Evo’s shot timer starts when you lift the lever, which is the behavior you want for building muscle memory. The dual manometer keeps the feedback loop visible. There is no app and no multi-profile curve recording. That is the point. Fewer distractions, better consistency.

If manual profiling is your draw, add an E61 flow control kit. The installation is straightforward with dealer guides. You will gain a needle valve at the group and often a gauge that reads pressure above the puck. Learn two simple profiles first. A gentle low-flow wetting for light roasts. A tapered finish to pull sweetness without astringency. Keep everything else fixed while you build the feel.

Competitive comparisons

ECM Synchronika
Stainless dual boilers, rotary pump, tank or plumb, and an updated OLED stack on current Synchronika II units with fast heat-up and scheduling. ECM also offers an OEM flow-control kit. The ECM answers with a more integrated screen experience and 2 bar steam capability. The Vetrano 2B Evo answers with a simpler control face, LED PID timer, and a price that often lands a few hundred dollars lower in the US. Choose ECM if you want on-chassis menus and the fastest warm-start. Choose Quick Mill if you prefer a plainer face with the same core capability and a calm rotary platform.

Profitec Pro 700
Sister-brand to ECM with stainless dual boilers and a rotary pump. Recent units add a fast heat mode and a PID that doubles as a shot timer. The Pro 700 leans minimalist and integrates controls on the face. The Vetrano 2B Evo feels similar in cup and steam. Decide on finish, dealer support, and pricing in your region. If you want selection between 15 and 20 amps with dealer configuration and a robust plumb-and-drain kit in the box, Quick Mill is a clean pick.

Lelit Bianca PL162T
Bianca ships with a needle-valve paddle and firmware low-flow modes that make it the profiling leader out of the box. It runs a vibe pump and a movable tank. Vetrano 2B Evo runs a rotary pump, goes plumb and drain, and keeps the face uncluttered. Pick Bianca if you want to ride the shot every morning by feel. Pick Vetrano if you want a traditional rotary-quiet platform that you can still upgrade with flow control later.

Rocket R Cinquantotto (R58)
Another dual boiler with rotary pump and plumb-in. Rocket uses a detachable control pod for PID settings and scheduling and integrates a shot timer on the face. Cups and steam power are comparable. The choice comes down to ergonomics and service access. If you like a clean face with a removable controller, Rocket is compelling. If you want everything on the chassis with an LED PID and easy internal access, Quick Mill is tidy.

Bezzera Duo MN
Dual boiler E61 with a touchscreen that handles PIDs, preinfusion, and scheduling. Steam boiler is smaller. No stock flow paddle. Vetrano 2B Evo has the larger steam reserve, rotary calm, and deeper parts ecosystem through major North American dealers. If you prioritize a screen-led workflow and value pricing, Duo MN is a smart play. If you want rotary-quiet plumb-in and a heavier frame, Quick Mill wins.

Quick Mill QM67 Evo
Same control DNA in a smaller, tank-only chassis with a vibratory pump. Dual boilers are smaller and the case is narrower. If you have a tight counter and want simple dual-boiler stability without plumbing, the QM67 Evo is great. If you want rotary quiet, direct line, and stronger steam, the Vetrano 2B Evo is the step up.

Real-world numbers and observations

  • Boilers and materials. 0.75 L brew and 1.4 L steam, both stainless and insulated. That is the right sizing for home stability and genuine steam headroom.
  • Pump and plumbing. Rotary pump, vertical placement for access. Run from a 3 L tank or plumb and drain with the included kits. Noise stays low either way.
  • PID and timer. The Evo PID reads temps and counts seconds during the shot. It removes the need for a separate timer and tightens your dial-in loop.
  • Amperage selection. Switchable 15 A or 20 A. Dual heating in 20 A, alternating in 15 A. Dealers configure and include a converter for 15 A. Easy to change later.
  • Dimensions and mass. About 16 x 12 x 18 inches and roughly 70 lb. Plan true depth with the portafilter installed and slack for lines.
  • Included accessories. Two portafilters, drain and plumb kits, and multiple steam tips are commonly included by major retailers. Verify regionally.
  • Price by region. United States 2,895 to 2,995 USD. UK often around 2,149 GBP when in stock. EU roughly 2,045 to 2,475 EUR depending on VAT. Australia commonly near 5,190 AUD. Compare out-the-door numbers with shipping and warranty.

Bench use: dial-in and daily rhythm

This is the routine that makes the Vetrano 2B Evo feel automatic.

  1. Water and warm-up. Fill the tank with softened or properly remineralized water, or open the line and confirm pressure and filtration. Power the brew boiler, lock a portafilter in, and give the machine time to heat soak for best results. The manual calls out about 15 minutes to see pressure and 30 for a full soak. Use a schedule if your mornings are consistent.
  2. Set brew temperature. Start around 93 Celsius for medium roasts. Bump warmer for light roasts. Resist the urge to change offsets without a reference device. Stability beats chasing numbers.
  3. Use the timer. Dose by scale. Distribute evenly. Tamp level. Pull to a set ratio and time. Adjust grind. Keep the brew pressure target steady and stop touching it once it is right. You will map taste to time and grind quickly when the timer lives on the machine.
  4. Milk cadence. Start with the two-hole tip to learn texture. Stretch briefly, then roll. Move to four-hole for 12 to 20 ounce pitchers and faster service. Raise steam temperature for guests, then bring it back for daily cappuccinos so your texture window is easier to hit.
  5. Clean as you go. Purge and wipe the wand. Water backflush at session end. Detergent backflush weekly if you pull daily. Vacuum grinds out of cup tray vents so they do not wick moisture into the case. Keep the top clear for airflow.
  6. Profiling path. If you decide you want manual flow control, install an E61 kit and start with two simple moves. A gentle low-flow wetting for light roasts, and a tapered finish for extra sweetness. Keep dose and temperature fixed while you learn the valve.

Where the Vetrano 2B Evo excels

  • Rotary-quiet dual boiler. You get the smooth pressure delivery and low noise of a rotary pump with true dual-boiler stability. The machine feels calm in use.
  • Plumb and drain ready. The platform supports the long-game bar setup. Start tanked now, plumb and drain later with parts already in the box.
  • Useful PID and timer. The Evo display consolidates temperature and shot time so you are not juggling devices while you dial.
  • Service-friendly internals. Vertical pump, stainless mushroom and gicleur, and thoughtful access panels make routine care low friction.

Clear trade-offs

  • No stock flow paddle. Manual profiling requires an add-on. That is fine for many buyers. If a paddle is non-negotiable, look at Bianca.
  • Heat-soak still matters. The E61 rewards patience for long sessions. Use scheduling and your shots will track.
  • Weight and depth. It is about 70 pounds and 18 inches deep. Measure real-world depth with portafilter and lines.

Scores

  • Build quality: 9.2
  • Temperature stability: 9.1
  • Shot consistency: 9.1
  • Steaming power: 9.0
  • Workflow and ergonomics: 9.0
  • Programmability and control: 8.8
  • Maintenance and serviceability: 9.1
  • Value: 9.0

Total: 9.1

Verdict

The Quick Mill Vetrano 2B Evo is the steady prosumer that keeps winning because it gets the fundamentals right. Stainless dual boilers under PID, a quiet rotary pump, direct plumb and drain, and a simple control stack with a real shot timer. It steams with authority for home and it is easy to maintain. If you know you want to ride profiles every morning, add an E61 kit or buy a machine built around a paddle. If you want a traditional lever machine that behaves like a professional tool and stays friendly to own, the Vetrano 2B Evo earns a long-term spot on the counter.

TL;DR

Rotary-quiet dual boiler with stainless internals, PID and timer, tank or plumb with drain, and strong steaming. It favors simple, repeatable workflows. Add an E61 flow kit if manual profiling is a must. Price sits near the top of the class, and it earns it in materials, behavior, and service layout.

Pros

  • Stainless dual boilers with tight PID control
  • Rotary pump with tank or plumb-in and drain-ready tray
  • Integrated shot timer on Evo PID
  • Strong steam from a 1.4 L service boiler
  • Service-friendly layout, stainless mushroom and gicleur
  • Optional joystick valves for fast steam control

Cons

  • No stock flow control
  • E61 favors a longer heat soak for perfect equilibrium
  • Heavy and deep for small counters
  • Pricing can move with region and promotions

Who it is for

  • Home baristas and prosumers who want a rotary-quiet dual boiler with plumb-in and drain support
  • Milk-drink households that need real steam capacity
  • Buyers who want a simple, analog face with a useful PID and timer
  • Enthusiasts who may add manual profiling later without switching platforms

Glanceable specs

  • Group: E61 lever, thermosyphon heated
  • Pump: Rotary, vertical mount for access
  • Boilers: Stainless 0.75 L brew and 1.4 L steam, insulated, independent PID control
  • Water: 3 L reservoir with low-water protection or direct plumb. Drain-ready tray
  • Controls: PID with integrated shot timer, dual manometer, independent boiler switches
  • Electrical: 110 V US, selectable 15 A or 20 A operation
  • Dimensions and mass: Approx. 16 in H x 12 in W x 18 in D, about 70 lb
  • Included: Two portafilters, drain kit, plumb kit, multiple steam tips, tamper (varies by dealer)

Market notes and variants

As of November 2025, US pricing clusters around 2,895 to 2,995 USD across major retailers. UK stock appears intermittently and often lists near 2,149 GBP for the 0995 “new version.” EU listings sit between roughly 2,045 and 2,475 EUR depending on VAT and the specific shop. Australia commonly posts around 5,190 AUD for the LED version. Many dealers offer joystick or knob valve options and will set your machine for 15 or 20 amps during bench testing. Compare out-the-door numbers including shipping, line kits, and warranty length before you buy.

Setup checklist

  • Place the machine with lever and wand clearance and real-world depth for a locked-in portafilter
  • Decide tank or plumb, then set the internal switches and attach the braided line and drain as needed
  • Fill with softened or properly remineralized water if you are running from the reservoir
  • Heat soak with a portafilter locked in, then purge before the first shot
  • Start medium roasts at 93 Celsius and adjust by taste
  • Verify brew pressure with a backflush disc once, then leave it alone
  • Pick two steam tips and two setpoints for your household, one for daily cappuccinos, one for guests
  • Water backflush at session end, detergent backflush weekly, lubricate the cam on schedule